AudioRealism Forum Index AudioRealism

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ADM Tip: Getting a more vintage sound

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    AudioRealism Forum Index -> User Community
View previous topic :: View next topic  
Author Message
audiorealism
Site Admin


Joined: 13 Oct 2003
Posts: 3879

PostPosted: Mon Sep 03, 2007 10:24 pm    Post subject: ADM Tip: Getting a more vintage sound Reply with quote

ADM has a number of options which can change the way the master output sounds.

Out of the box, ADM's default configuration is to be as clean as possible, so the user can shape his/her sound as they please.

But if you want a more vintage sound, its possible to do that directly from within the plug-in.

1. Right-Click the Master output sockets and select Output Limiter: Soft
2. Select Output Model: 909
3. Crank up master volume

This should be a starting point for getting a more vintage sound. Its possible to shape the sound further by using the PCF filter. Set cutoff to around 16khz and add a bit of Q, about 10%.

This is exactly how the 909 vs ADM comparisons where done on the sound examples page.

Note: These settings are not saved with a patch, however they are saved with the host project and properly recalled on load.


Last edited by audiorealism on Wed Sep 19, 2007 3:28 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
Brouculy



Joined: 03 Sep 2007
Posts: 7
Location: Korea, The Repubilc of

PostPosted: Tue Sep 04, 2007 7:39 am    Post subject: Re: ADM Tip: Getting a more vintage sound Reply with quote

Mike wrote:
Its possible to shape the sound further by using the PCF filter. Set cutoff to around 16khz and add a bit of Q, about 10%.


Which filter should I select? BP or LP?
Back to top
View user's profile Send private message
audiorealism
Site Admin


Joined: 13 Oct 2003
Posts: 3879

PostPosted: Tue Sep 04, 2007 4:52 pm    Post subject: Reply with quote

The LP filter.

Here, I made a comparison between the 909 and ADM using the techniques described above:

http://www.audiorealism.se/adm/adm909comp.mp3


Last edited by audiorealism on Wed Sep 05, 2007 7:57 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
Brouculy



Joined: 03 Sep 2007
Posts: 7
Location: Korea, The Repubilc of

PostPosted: Tue Sep 04, 2007 11:51 pm    Post subject: Reply with quote

Thanks, Mike Very Happy
Back to top
View user's profile Send private message
tr909



Joined: 18 Sep 2007
Posts: 11

PostPosted: Wed Sep 19, 2007 5:02 am    Post subject: Reply with quote

Can someone verify this is working in Ableton? I'm using version Ableton 4 (old version) and when I right click the main outs it just brings Ableton to the forground.

Can someone with Ableton confirm this works - it's probably just my old version of Ableton causing the problem.

Update - my mistake. works fine.


Last edited by tr909 on Wed Sep 19, 2007 3:25 pm; edited 1 time in total
Back to top
View user's profile Send private message
audiorealism
Site Admin


Joined: 13 Oct 2003
Posts: 3879

PostPosted: Wed Sep 19, 2007 6:35 am    Post subject: Reply with quote

What version of Live are you using?
Back to top
View user's profile Send private message Send e-mail
tr909



Joined: 18 Sep 2007
Posts: 11

PostPosted: Wed Sep 19, 2007 3:25 pm    Post subject: Reply with quote

Mike wrote:
What version of Live are you using?


Ignore. User error! Works fine. I just need to learn my right from my left (I was left clicking for some reason).
Back to top
View user's profile Send private message
kswaby10



Joined: 28 Feb 2011
Posts: 2

PostPosted: Mon Feb 28, 2011 4:55 pm    Post subject: Reply with quote

Think i was having a problem with the mp3 but it's working fine. Thanks.


car games fishing games zombie games typing games ninja games amazon coupons iphone cases
Back to top
View user's profile Send private message
davidbasener



Joined: 04 Aug 2011
Posts: 1

PostPosted: Thu Aug 04, 2011 1:13 am    Post subject: Re: ADM Tip: Getting a more vintage sound Reply with quote

Mike wrote:
ADM has a number of options which can change the way the master output sounds.

Out of the box, ADM's default configuration is to be as clean as possible, so the user can shape his/her sound as they please.

But if you want a more vintage sound, its possible to do that directly from within the plug-in.

1. Right-Click the Master output sockets and select Output Limiter: Soft
2. Select Output Model: 909
3. Crank up master volume

This should be a starting point for getting a more vintage sound. Its possible to shape the sound further by using the PCF filter. Set cutoff to around 16khz and add a bit of Q, about 10%.

This is exactly how the 909 vs ADM comparisons where done on the sound examples page.

Note: These settings are not saved with a patch, however they are saved with the host project and properly recalled on load.



This really helped me. Thanks for sharing dude.
_________________
Energy Take Classic 5.1
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    AudioRealism Forum Index -> User Community All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group